Cat.5e RJ-45 110, Horizontal Jack

PowerPRO™ : Performance You Can Rely On!

Cat.5e RJ-45 110, Horizontal Jack

Cat5ejack110hPowerPRO™ : Performance You Can Rely On!

Cat.5e RJ-45 110/Krone, horizontal type Keystone Jack, T568A/B Component level

The DINTEK PowerPRO 8-position modular jack offers enhanced performance at component, link and channel levels. The jacks also offer increased flexibility with universal termination using either T568A or T568B wiring patterns.

The PowerPRO Enhanced CAT5 jacks have been manufactured with the ability to fit most major face plate brands with or without module clips.
Regardless of your application requirements, the DINTEK PowerPRO keystones in combination with other DINTEK CAT.5E components, will give an assurance to the end user, along with the aid of the 25year warranty offered by DINTEK Electronic to it’s registered installers.
DINTEK PowerPRO …. Systems you can rely on.
  • Voice
  • ISDN
  • 10Base T(IEEE 802.3)
  • Fast Ethernet(IEEE802.3)
  • 100Vg-AnyLAN(IEEE 802.12)
  • Token Ring(IEEE 802.5)
  • TP-PMD(ANSI X3T9.5)
  • 100Base-T Ethernet(IEEE 802.3u)
  • 155/622 Mbps ATM
  • 1000Base-T
  • 550 MHz Broadband video
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5)
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video
  • Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
  • 110 type IDC termination
  • Accept 22~26AWG, stranded or solid wire
  • Modular jack meet FCC part 68
  • Wiring: T568A/B
  • IDC connector with large space between each pair to improve crosstalk
  • Press fit IDC connector terminal for high frequency application
Environmental Conditions 
  • Temperature range:
        Storage: -40 to +70°C           Operational: -10 to +60°C
  • Relative humidity (operational): max. non-condensing 93%
Electrical Characteristics
  • Insulation resistance between any two conductors: 500 MegaOhms min.
  • DC resistance: 0.1 ohms max.
  • Dielectric with standing voltage: 1000V, RMS, 60HZ, 1 MIN.
  • Contact resistance: 20 MilliOhms max.
  • Current rating: 1.5 AMPS at 20°C
Physical Characteristics
  • Housing: High-impact, FLAME-PETARDANT plastic, UL94V-0 rated, spring wire/contact blades.
  • Contact material: Phosphor bronze alloy
  • Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.
Mechanical Characteristics
  • Total mating force: 800 grams for a 8 wire leads minimum.
  • Retention: 30lbs min between the jack and plug.
  • Insertion/Extraction life: 750 cycles minimum.
  • Number of IDC terminations: 200 minimum.