Cat.6 4P S/FTP Patch Cord -5mtr

PowerMAX™ : Gigabit High Speed Ethernet

Cat.6 4P S/FTP Patch Cord -5mtr

Cat.6 4P S-FTP Patch CordPowerMAX™ : Gigabit High Speed Ethernet

Cat.6 4P S/FTP Patch Cord – 5mtr
The DINTEK PowerMAX™ Category 6 solutions are guaranteed to exceed ClassE channel specifications as set down in International standards.
Our PowerMAX™ shielded solution comprises Category 6 component compliant patch panels, keystones and patch cords. When combined with DINTEK’s Category 6 FTP * S/FTP cable, an end-to-end channel exists that maximises data throughput and provides headroom for all future technologies operating beyond one Gigabit. Combined with other DINTEK PowerMAX™ shielded products, our Category 6 cable is the perfect solution to your voice and data communications needs.


  • Category 6  Products exceed all TIA and ISO specifications for Category 5e/6 cabling systems and components
  • They have been Independently confirmed for system performance
  • Meets FCC parts 68
  • ANSI/TIA-568-C.2
  • ISO/IEC 11801
  • DINTEK  Cat 6 products can be warranted for 25 years
  • Cat6  products are Interoperable with DINTEK and other standards compliant products
  • Independently been confirmed for Gigabit Ethernet applications
  • Having a single vendor solution ensures best system performance
  • Our products meet or exceed performance requirements for existing and proposed high-speed network applications including:
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5) 
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video
  • UL444 communication cables standard, UL AWM style 2835.
  • Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement
  • ISO/IEC 11801
  • CENELEC EN 50173
  • Molded boots prevent pin from bending and cables from kinking
  • 24AWG stranded wire provides maximum flexibility
  • Brilliant colors make management a snap
  • Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement
  • The various colors are available to meet TIA/EIA-606 standards
  • The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements
Physical Characteristics
  • Twisted pair color code:
    Pair 1> blue, white/blue ring.
    Pair 2> orange, white/orange ring
    Pair 3> green, white/green ring
    Pair 4> brown, white/brown ring
  • Conductor: 26AWG ,Stranded anneal copper wire
  • Insulation material:Foamed-Skin PE
  • Diameter of dielectric core:1.0±0.05mm
  • Number of twist pairs: 4 pairs
  • Individual Shielding:A layer of aluminum-foil laminated tape will be wrapped over the twinning,the aluminum side face-out.
  • Assembly: 4 pairs of dielectric core shall be stranded in circular form.
  • Overall Shielded: Tinned copper wire braiding,normal with. 65% coverage
  • Material of jacket: PVC/LSOH
  • Overall Diameter: Ave. 5.7±0.2mm
  • Flame Rating: CM
  • Color: gray, yellow, blue, red, orange, green, etc.RJ45 plug:Housing>polycarbonate
  • Contact>copper alloy 50u” gold plated over nickel
  • Strength>20lbs. min
  • Durability>200 cycles min.
  • Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.
  • Wiring schemes: T568B
Electrical Characteristics
  • Impedance: 100 15 ohm
  • Capacitance unbalance pair to ground:max. 330pf/100m Max
  • D.C.R(Max.) : nom. 14.8 ohm/100m at 20℃
  • DC Insulation Resistance (Min.): 1500MΩ/100m min.
  • Resistance unbalance(Max.):3% MAX./100m
  • Durability:750 cycles min.