Cat5e Horizontal ezi-JACK90 - Blue

ezi-JACK™ Quick Connect Jacks: PERFOMANCE YOU CAN RELY ON !

Cat5e Horizontal ezi-JACK90 – Blue

blueejackezi-JACK™  Quick Connect Jacks: PERFOMANCE YOU CAN RELY ON !

Cat.5e horizontal type Keystone ezi-JACK90™, T568A/ B, Blue
The DINTEK ezi-TOOL™ system is an all-in-one punch down and wire trim process, design to assure even connections, better performance and faster fit off times.
The products in the ezi-TOOL™ system comprise 90degree and 180degree Cat5e and Cat6 modular keystone jacks, as well as the universal DINTEK ezi-TOOL™ for termination.
The jacks work with either the ezi-TOOL™ or a standard 110 style DINTEK punch down tool, this avoiding the need to have two different style of jacks.

 

 

Applications
  • Voice
  • ISDN
  • 10Base T(IEEE 802.3)
  • Fast Ethernet(IEEE802.3)
  • 100Vg-AnyLAN(IEEE 802.12)
  • Token Ring(IEEE 802.5)
  • TP-PMD(ANSI X3T9.5)
  • 100Base-T Ethernet(IEEE 802.3u)
  • 155/622 Mbps ATM
  • 1000Base-T
  • 550 MHz Broadband video
Standards
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5)
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video
Features
  • Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
  • 110 type IDC termination
  • Accept 22~26AWG, stranded or solid wire
  • Modular jack meet FCC part 68
  • Wiring: T568A/B
Environmental Conditions
  • Temperature range:
        Storage: -40 to +70°C
        Operational: -10 to +60°C
  • Relative humidity (operational): max. non-condensing 93%
Electrical Characteristics
  • Insulation resistance between any two conductors: 500 MegaOhms min.
  • Dielectric with standing voltage: 1000V, RMS, 60HZ, 1 MIN.
  • Contact resistance: 20 MilliOhms max.
  • Current rating: 1.5 AMPS at 20°C
Physical Characteristics
  • Housing: High-impact, FLAME-PETARDANT plastic, UL94V-0 rated, spring wire/contact blades.
  • Contact material: Phosphor bronze alloy
  • Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.
Mechanical Characteristics
  • Total mating force: 800 grams for a 8 wire leads minimum.
  • Retention: 30lbs min between the jack and plug.
  • Insertion/Extraction life: 750 cycles minimum.
  • Number of IDC terminations: 200 minimum.