Cat5e Shielded Tooless RJ45 Jack

PowerPRO™ : Performance You Can Rely On!

Cat5e Shielded Tooless RJ45 Jack

cat5shieldedjackPowerPRO™ : Performance You Can Rely On!

Cat.5e Fully shielded Toolless Keystone Jack, T568A/ B
Component levelThe DINTEK PowerPRO 8-position modular jack offers enhanced performance at component, link and channel levels. Our shielded jacks offer increased flexibility with universal termination using either T568A or T568B wiring patterns.
The PowerPRO Enhanced CAT5 shielded jacks have been manufactured with the ability to fit most major face plate brands with or without module clips.
Regardless of your application requirements, the DINTEK PowerPRO keystones in combination with other DINTEK CAT.5E components, will give an assurance to the end user, along with the aid of the 25year warranty offered by DINTEK Electronic to it’s registered installers.
DINTEK PowerPRO …. Systems you can rely on.
Applications
  • Voice
  • ISDN
  • 10Base T(IEEE 802.3)
  • Fast Ethernet(IEEE802.3)
  • 100Vg-AnyLAN(IEEE 802.12)
  • Token Ring(IEEE 802.5)
  • TP-PMD(ANSI X3T9.5)
  • 100Base-T Ethernet(IEEE 802.3u)
  • 155/622 Mbps ATM
  • 1000Base-T
  • 550 MHz Broadband video
Standards
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5)
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video
Features
  • Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
  • 110 type IDC termination
  • Accept 22~26AWG, stranded or solid wire
  • Modular jack meet FCC part 68
  • Wiring: T568A/B
  • IDC connector with large space between each pair to improve crosstalk
  • Press fit IDC connector terminal for high frequency application
Environmental Conditions
  • Temperature range:
        Storage: -40 to +70°C
        Operational: -10 to +60°C
  • Relative humidity (operational): max. non-condensing 93%
Electrical Characteristics
  • Electrical Insulation resistance: 500 mΩ min.@ 100V d.c
  • Dielectric with standing voltage: 1000 V d.c. or a.c. Peak Contact to
  • Contact @ 60 Hz for 1 MIN.
  • Spring Wire Contact resistance: 20 mΩ Max.
  • Voltage/Current rating:150VAC/1.5A
  • IDC Contact Resistance: 2.5 mΩ Max
Physical Characteristics
  • Housing: High-impact, FLAME-PETARDANT plastic, UL94V-0 rated, spring wire/contact blades.
  • Contact material: Phosphor bronze alloy
  • Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.
Mechanical Characteristics
  • Total mating force: 800 grams for a 8 wire leads minimum.
  • Retention: 30lbs min between the jack and plug.
  • Insertion/Extraction life: 750 cycles minimum.
  • Number of IDC terminations: 200 minimum.